Petrol Chainsaw support

1. Loosen the bar nuts that hold the clutch cover/chain brake. Use a wrench.

Note: Some models have only one bar nut.

Refer to Product overview of your manual for the position of the chain tensioning screw on your product.

1. Tighten the bar nuts by hand as tightly as you can.

2. Lift the front of the guide bar and turn the chain tensioning screw. Use a wrench.

3. Tighten the saw chain until it is tight against the guide bar but still can move easily
   

4. Tighten the bar nuts using the wrench and lift the front of the guide bar at the same time.

1. Make sure you can pull the saw chain around freely by hand and that it does not hang from the guide bar.

Loosen bar nuts prior to adjusting chain tension. Please refer to Operators Manual for more details. A digital copy of Operators Manual can be obtained from website or by downloading Husqvarna Connect App.