Skip to Content
Riding Lawn Mower support
Engine dies when tractor is shifted into reverse
Try this solution
Turn ignition key to ROS "ON" position
See the step-by-step guide for more information on the reverse operating system (ROS).
1
Reverse operating system (ROS)
Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.
⚠️WARNING: Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.
Using the reverse operating system -
Only use if you are certain no children or other bystanders will enter the mowing area.
Depress brake pedal all the way down.
With engine running, turn ignition key counterclockwise to ROS "ON" position.
Look down and behind before and while backing.
Slowly depress reverse drive pedal to start movement.
When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.
On this page