Riding Lawn Mower support

Your tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use.

1
Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.

Important: Make certain the tractor’s discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.

2
Make sure the attachment clutch control is in the “DISENGAGED” position, set the parking brake, and stop the engine.

3
Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle.

⚠️NOTE: Tug hose ensuring connection is secure.

4
Turn the water on.

5

<p>While sitting in the operator’s position on the tractor, re-start the engine and place the throttle lever in the Fast "<img src="https://mavenoidfiles.com/products/1022574/a751cce85d73be34/Screenshot_2020_11_19_kl.19.56.png" style="display: inline; width: 20px; height: 20px" />" position.</p>

<p></br></p>

Important: Recheck the area to ensure the area is clear. Ensure no children are in the area while cleaning the deck.

6
Move the tractor’s attachment clutch control to the “ENGAGED” position. Remain in the operator’s position with the cutting deck engaged until the deck is cleaned.

7
Move the tractor’s attachment clutch control to the “DISENGAGED” position. Turn the ignition key to the STOP position to turn the tractor’s engine off. Turn the water off.

8
Pull back the lock collar of the nozzle adapter to disconnect the adapter from the nozzle washout port.

9
Move the tractor to a dry area, preferably a concrete or paved area. Place the attachment clutch control in the “ENGAGED” position to remove excess water and to help dry before putting the tractor away.

⚠️WARNING: A broken or missing washout fitting could expose you or others to thrown objects from contact with the blade.

• Replace broken or missing washout fitting immediately, prior to using mower again.

• Plug any holes in mower with bolts and locknuts.