Riding Lawn Mower support

WARNING: Do not use the product with a broken or missing deck washout port. There is a risk of thrown objects. Replace a broken or missing deck washout port immediately.

1. Park the product in a clear area on your lawn that is
   near a water source with a garden hose.
   CAUTION: Do not point the discharge chute of the product in the direction of buildings or vehicles.

2. Make sure that the cutting deck is disengaged.

3. Stop the engine.

4. Apply the parking brake.

5. Connect a garden hose (A) to the deck washout port (B) and start the water supply.
   

6. Sit in the seat and start the engine.
   CAUTION: Examine the area again to make sure that the area is clear before you start the engine.

7. Engage the cutting deck and let it operate at full
   throttle until the cutting deck is clean.

8. Disengage the cutting deck and stop the engine.

9. Stop the water supply and disconnect the garden
   hose from the deck washout port.

10. Move the product to a dry area.

11. Sit in the seat and start the engine.

12. Engage the cutting deck and let it operate until the
    cutting deck is dry.