Zero Turn Mower support

If the mower is not tracking straight, check the air pressure in both rear tires. Recommended air pressure for the rear tires is 15 psi (1 bar).

1
Tracking adjustments are made using the tracking bolts. The tracking bolts limit the motion control levers when in the full-forward position.

2
For preliminary tracking adjustment, move unit to an open, unobstructed area such as an empty parking lot or open field.

3
Using a 1/2" wrench, back the tracking bolts out until flush with nut.

4
Test operate unit by driving it at full throttle and the full forward position on both motion control levers. Gradually turn in the tracking bolt on the right hand side until the unit noticeably starts drifting right.

5
Drive forward at full throttle with both motion control levers in the full forward position. Gradually turn in the left tracking bolt until unit tracks straight.